Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. |
Drive Tires 26x12-12, 6ply Multi Trac® |
Cup Holder Standard |
Tractor Frame Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel. |
Steering Control Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness. |
Front Caster Tires 15 x 6.0-6, smooth-tread, semi-pneumatic. |
Parking Brake Lever-actuated internal wet disc brake. |
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. |
Electrical 12-volt battery with 55-amp alternator. |
Engine Brand Yanmar |
Engine Model 3TNV88C |
Engine Displacement 1,642 |
Engine Series TNV |
Engine Type Common Rail Diesel |
Engine Speed 3,000 RPM |
Air Filter Heavy-duty canister air filtration system with electronic vacuum sensor |
Fuel Type Diesel |
Fuel Capacity 12-gallon (45.4-L), side fuel tanks |
Fuel Indicator Yes - mechanical float type |
Drive Hydro-Drive |
Drive Description Kanzaki KPS-18T Transmission, 15-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-H motors, hydraulic oil cooler. |
Speed Infinitely variable speed selection from 0–12.5 mph (20 kmph) forward, 0–7 mph (11 kmph) reverse. |
Carb Compliant Yes |
Deck Lift Hydraulic |
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
ROPS 2-post foldable ROPS standard with seat belt and latch. |
PTO Engagement Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft |
Drive Wheel Release Allows unit movement without engine running. |
Casters .50" thick caster yoke arms. |
Model Description Lazer Z Diesel 37 HP** Yanmar 3TNV88C Diesel w/72" UltraCut Series 4 Deck, Susp Seat & 15" Semi-Pneum |
Width / Cutting Deck 72" |
Deck Style Floating Deck |
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight. |
Blade Tip Speed Approximately 18,500 fpm |
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator's seat. |
Blades 3 Blades at 24.50" Length |